Good News: Our Sculptures Are Low-Maintenance

Below are our top tips for cleaning, protecting, and maintaining your hand-painted sculpture — whether it’s indoors or braving the Florida sun.

N—01
Wipe Gently, Not Aggressively

Dust and dirt? Just use a soft, damp cloth to wipe down your statue. Avoid scrubbing, scouring pads, or harsh cleaning sprays. Your sculpture is art — treat it like a painted canvas.

N—02
No Harsh Chemicals

Avoid bleach, alcohol-based cleaners, or anything abrasive. These can damage the paint or protective coating. Stick to water and mild soap if needed.

N—03
Check for Chips or Cracks

Over time, even the most durable pieces can take a hit. If you notice a chip or scuff, let us know. We offer touch-up kits and tips for a quick refresh.

Outdoor Protection

DON’T Add UV-Resistant Sealant

Our pieces come pre-sealed for outdoor use, we don’t recommend applying anything.

Secure in Windy Areas

If your sculpture is lightweight and in a high-wind area, secure it to a base or with discreet landscape anchors to prevent tipping or shifting.

Shade is Your Friend

While our paints are outdoor-safe, prolonged direct sunlight can cause fading over time. Placing your sculpture near trees, awnings, or partial shade can help extend the vibrancy of your finish.

Extreme Weather? Bring It In.

If you’re in an area with snow, hurricanes, or heavy storms, we recommend moving your sculpture indoors or covering it with a breathable tarp during off-season months.

Don’t Let Water Pool

If your sculpture sits on a flat base, avoid placing it where water collects. Elevate slightly if needed, or place on stones, mulch, or a base plate to improve drainage.

Basic Care Tips

Touch-Up Support

Request a Paint Match Kit

Need to touch up a chip or blend in a scratch? We can send a paint match kit made specifically for your piece. Just contact us with a photo and your original order info.

  • Send a clear photo of the damaged area

  • Include your original order number

Get In Touch

A Gallery of One-of-a-Kind

Custom Statues and Sculptures Made for Clients Like You

How to Clean and Maintain Cast Aluminum Garden Statues

Protect the existing finish: remove loose debris, wash gently with a soft cloth or sponge and mild soap, rinse without high pressure, and dry or allow the piece to air-dry completely. Inspect the sculpture before and after cleaning. If you find a chip or finish change, photograph it and ask for finish-specific guidance before attempting a repair.

Medium Outdoor Turtle Garden Statue in Multi-Color Artisan hand-painted finish displayed in landscaped outdoor setting
Hand-painted surfaces benefit from gentle cleaning and regular visual checks.

A safe routine for painted cast aluminum

  1. Move nearby objects and inspect. Look for loose debris, chips, scratches, standing water, and unstable placement. Take photographs of any concern before cleaning.
  2. Remove dry debris. Use a clean soft brush or microfiber cloth. Avoid stiff wire brushes and abrasive pads that can mark the finish.
  3. Test a small area. Use mild soap diluted in water and a soft cloth or sponge on an inconspicuous spot first.
  4. Clean from the top down. Support movable parts and avoid forcing water into openings or seams.
  5. Rinse gently. Use clean water without a concentrated high-pressure stream.
  6. Dry and recheck. Wipe accessible surfaces with a clean soft cloth or let the piece air-dry, then inspect the finish again.

What to avoid

  • Abrasive powders, scouring pads, wire brushes, and aggressive scraping
  • Harsh solvents or chemicals not approved for the finish
  • Pressure washing close to painted details, seams, or decorative projections
  • Dragging a sculpture across concrete, pavers, or gravel
  • Adding another clear coat or UV sealant without finish-specific approval

Sculpture Shops pieces are sold with a finished, sealed surface. More coating is not automatically better and may change appearance or complicate a later repair.

Adjust the schedule to the location

There is no single calendar for every garden. Inspect more often when a sculpture receives irrigation spray, bird activity, falling leaves, direct sun, pool splash, coastal exposure, or frequent contact. A sheltered entry piece and a poolside statue have different cleaning demands.

Keep the surrounding area drained and trimmed. Soil, mulch, and dense foliage should not continually cover painted details or hold moisture against the base. Check that the supporting surface remains level and stable.

Move a sculpture without damaging the finish

Clear the route before lifting, and use enough people or appropriate equipment for the piece’s size and shape. Hold only secure structural areas identified for handling; do not pull on fingers, tails, wings, mailbox doors, or other projections. Set the sculpture on a clean, padded surface if it must be moved temporarily. Large pieces should be handled by people prepared for the actual dimensions and listed weight.

Plan around the exact sculpture

Size and form affect cleaning access. The Medium Outdoor Turtle Statue is listed at 22 × 12 × 12 inches, while the Seaside Serenity Mermaid Sculpture is listed at 36 × 72 × 42 inches. A long reclining piece may require access on several sides; a compact piece may be movable, but it still should be lifted rather than dragged.

Frequently asked questions

How often should I clean a cast-aluminum garden statue?

Inspect it regularly and clean when debris, residue, or environmental exposure calls for it. Location matters more than a rigid monthly rule.

What should I do if the finish chips?

Photograph the area, note when it appeared, and request advice for the exact product and finish before sanding, painting, or sealing it.

Can I use the same cleaner on every statue?

No. Materials and finishes vary. Start with the gentlest method and follow guidance for the particular piece.

Should I cover the sculpture?

That depends on the piece, location, cover material, airflow, and conditions. A cover that traps moisture or rubs the finish can create a different problem.

Can irrigation affect the appearance?

Repeated spray can leave mineral residue and keep surfaces unnecessarily wet. Where practical, adjust sprinkler direction and clean developing residue gently before it becomes difficult to remove.

Browse garden statues or contact Sculpture Shops with the product link and photographs when you need care guidance for a specific finish.